1.

Advanced DC FB1-4001A double shaft series wound motor, 72-144 VDC, 19HP, 9.1" diameter electric vehicle motor. 

This is one of the most popular motors used in EV conversions.  It has a tailshaft, which allows you to connect your alternator, compressor, etc., to the electric motor.

 $1699.99

2. 

This is the WarP 9 Motor.  It is a 9.25" diameter, series wound DC motor with a double ended shaft.

The WarP 9 ™ motor is similar to the ADC 9" motor, but with several improvements. Of the most notable changes, they have a larger com and utilize the large style brushes.  The com bars are more securely attached to the arbor, so they will be less likely to lift. The drive shaft is bored for a pilot bearing and drilled & tapped for a 5/16 - 18 bolt. The tail shaft also has a 1/4 - 20 bolt hole to mount tach sensors or secure couplers and accessories.

Again, they have duplicated the ADC 9" mounting bolt pattern allowing clients to use preexisting mounting adapters. Class "H" insulation is used throughout the motor. The drive shaft and tail shaft have

standard keyways cut into them.

 $1899.99

3.

D&D Motor Systems  - ES-31C

Weight: 83.0 lbs

D&D Motor Systems 72-144 Volts, 18hp, Double Shaft

12hp Cont @ 96 Volts

1.125" Diameter 3" long Double Shaft Keyway length 2.50

6.7" Diameter x 15.05" long Casing

Peak Horsepower Rating = 49 HP

This Motor is good for Small Sized Electric Vehicle Conversions.  The efficiency RPM on this motor is about 110 RPM/Volt

72 Volt 165A 12 HP 1750 RPM

96 Volt 150A 13.6 HP 2950 RPM

$1399.99